Tel: 0512-68022751
Email: hengda@szhdjh.com.cn
Address: No. 428, Shixu Road, Xukou Town, Wuzhong District, Suzhou City
Suzhou Evergrande Purification Equipment Co., Ltd.
PSA pressure swing adsorption nitrogen production principle
Carbon molecular sieve can simultaneously adsorb oxygen and nitrogen in the air, and its adsorption capacity also increases with the increase of pressure, and there is no significant difference in the equilibrium adsorption capacity of oxygen and nitrogen under the same pressure. Therefore, it is difficult to complete the effective separation of oxygen and nitrogen only by the change of pressure. If the adsorption rate is further considered, the adsorption characteristics of oxygen and nitrogen can be effectively distinguished. The diameter of oxygen molecules is smaller than that of nitrogen molecules, so the diffusion rate is hundreds of times faster than that of nitrogen, so carbon molecular sieves absorb oxygen very quickly, and the adsorption reaches more than 90% in about 1 minute; at this time, the adsorption capacity of nitrogen is only 5%. So the adsorption is mostly oxygen at this time, and the rest is mostly nitrogen. In this way, if the adsorption time is controlled within 1 minute, oxygen and nitrogen can be initially separated, that is to say, adsorption and desorption are realized by pressure difference, adsorption when the pressure increases, and desorption when the pressure decreases. The difference between oxygen and nitrogen depends on the speed difference between the two being adsorbed, which is achieved by controlling the adsorption time. The time is controlled very short, oxygen has been fully adsorbed, and nitrogen has not yet been adsorbed, and the adsorption process is stopped. Therefore, the pressure swing adsorption nitrogen production must have a pressure change, and the time should be controlled within 1 minute.
Purification principle
Catalytic oxygen removal with nitrogen. High-efficiency adsorbents and high-efficiency filters remove impurities such as oxygen, water vapor and dust in nitrogen. The two groups are used alternately, and the equipment can run continuously for a long time.
Two adsorption dryers are connected in parallel, one works and the other can be regenerated at the same time. Alternate work and regeneration to ensure continuous operation. The dryer works at normal temperature. When the dryer is regenerated, it needs to be heated to 350 °C and flushed with pure gas for regeneration. Su Pure nitrogen generator, the purity can reach 99.9995% professionally manufactured by Suzhou Evergrande Purification Equipment Co., Ltd. It can be customized according to customer requirements. Friends who need it are welcome to inquire! Thanks!