Today, I intend to chat with you about the sequence of turning on and off the nitrogen generator. I thought last time we talked about the normal use of not only turning on the machine, of course, it must be turned on and off, so the shutdown is also after the nitrogen generator is used The last step, how to properly turn off the nitrogen generator? Here, the editor will talk with you about the sequence process of the nitrogen generator machine.

Shutdown sequence

1. Set the temperature on the temperature gauge of the nitrogen generator to 0°C. When the actual temperature is lower than 30°C, close the inlet valve of the nitrogen generator, make the intake pressure gauge zero, and close the air compressor.

2. Close the power supply of the refrigerating machine.

3. Close the power supply of the supercharger, then close the water inlet valve and the return valve, and close the nitrogen storage tank into the seasonal door.

4. Close the power supply of the nitrogen generator. Matters needing attention Air compressor: Please read the operation manual of the air compressor. Buffer tank: (air tank) Regularly discharge the cold liquid in the tank (3-4 people per shift) Air dryer: Pay attention to the evaporation table (the evaporation table cannot be zero , if it is zero, it is necessary to repair) Nitrogen generator: filter element. 3000-4000 hours to replace. Activated carbon particles 6000-8000 hours replacement

The above is the operation process of the nitrogen generator machine compiled by Xiaobian for everyone, I hope it can be useful to everyone. If you need to buy nitrogen generator equipment, you may wish to take a look at the nitrogen generator manufacturer - Suzhou Evergrande Purification Equipment Co., Ltd.